Tomer Gabel's annoying spot on the 'net RSS 2.0
# Monday, January 30, 2006

I'm a self-proclaimed part-time, low-budget audiophile (there's a mouthful), so I often try to combine good performance with reasonable cost. To that end, considering I spend about 80% of my time at work (and, up until recently, home as well) with headphones on my head, the Sennheiser HD600s I got about five years ago for the price of about 200 of today's US dollars after shipping and taxes were the absolute best bargain I've ever made. The Jean-Marie Reynaud Twin MK2 speakers I also bought at about the same time were so impressive that the lowest-priced comparable speakers were 60% more expensive.

Things have somewhat improved since then; the taxes on audio equipment in Israel have been considerably reduced, although at some 34% they're still very high (down from 70%...). I mentioned this before in my post regarding the Yakumo Hypersound Car. Since then I went to an auto shop for some additional equipment, specifically a 6x9" component set, 3.5" mids to replace the crappy ones in my Punto, a 12" Pioneer sub and 2x60w (continuous) amp (I'll post the models number later - damned if I remember).

On the left: Pioneer sub under the component speak, on the right: Yakumo Hypersound Car installed

While the CD receiver was a breeze to install, I'm pretty glad I didn't attempt to do the rest of it alone; I don't know jack about car electronics and some of the stuff involving the installation of the amp I didn't know to begin with (such as hooking up the negative terminal to the car chassis) and I would've done a heck of nasty job if I tried running some of the wires on my own. On the other hand, contrary to my usual cautious self I didn't do much market research and ended up paying considerably more than the equipment was worth. It was definitely a learning experience, though, and I won't make these mistakes next time.

That said, the sound is great - not perfect but I'm still tweaking it. The Yakumo unit turns out to have very poor amplification; at first I thought the specified 65dB signal-to-noise ratio was a mistype in the product manual, but it turns out rather accurate; there is a very audible hiss at even moderate volume levels (which I couldn't hear earlier because of the crappy speakers I bought the car with) and the rear-speaker sound is bright to the point of being harsh. This may or may not be attributed to the Pioneer component speakers - if so you can bet that they'll be replaced - but in the meanwhile I've found the amplification so horrid that I'm replacing the 2-channel monobridged Pioneer amp with a quad-channel amp to drive both sub and rear speakers (5- and 6-channel amplifiers are prohibitively expensive, so I'll skip those for now).

The Yakumo unit also suffers from some pretty severe usability issues; the TOC indexing times for USB devices (tested with a fully loaded iRiver H320) were nothing short of abhorring (about 3 minutes from iRiver boot). With CDs the problem is less of an issue, about 20 seconds for a 700MB CD, but I still think it's rather stupid that the unit can boot up to the exact location I last powered it off in but has to index the TOC first. The random mode is extremely useful with compressed files, but why does it change track when I turn it on? The fact that I can't navigate by folder (particularly with the existence of a jog dial!) without going through the tedious search function is ridiculous, and I've actually managed to get the unit's firmware to crash once or twice (Update: actually, the unit seems to be extremely crash-prone). I believe most if not all of these problems can be solved with a little work on the drive's firmware, but there is none from Yakumo. In my opinion the solution would be to simply open-source the firmware; it's probably based mostly on LGPL'd code to begin with, and it would allow community involvement in empowering the brand. I, for one, would be delighted to tweak the source code to my heart's content; it would make the unit all that more useful. With the lackluster amplification and usability issues it's very hard to recommend the unit to anyone but a die-hard OGG Vorbis fan.

Update: Having owned this unit for several months I can safely say that it, quite plainly, sucks. It is crash-prone, error-prone, extremely slow on boot up, requires constant resets and provides very low sound quality to boot. Its one saving grace is Vorbis support, and even for me that's not enough to save it from a "piece of crap" verdict. I'm going to replace this thing as soon as I find a decent alternative; the XiphWiki points at a similar product from Silvercrest, but given the track record of these things I'm inclined to forego in-dash players altogether and go for a hard-drive based solution. Now if I can only find a decent one...

Monday, January 30, 2006 2:32:34 AM (Jerusalem Standard Time, UTC+02:00)  #    -
Music | Personal
# Sunday, January 29, 2006

Whenever I get a new machine (at work, at home, anywhere) I'm always astounded by the sheer amount of time it takes to get it up and running. I don't mean just the basics, I mean a fully-functional platform that is set up just the way I'm used to, right down to the folder display settings in Explorer and the toolstrip I always like on the right side of the screen.

I mean, seriously, there's gotta be a better way to do this. The following applications are just the basic things I need to be efficient:

And that's just to get me through the day. It doesn't include all the multimedia and development tidbits, like:

I reckon the net installation and customization time is over 10 hours (some installations can be done in parallel, some can be deferred to a later time). That is a lot of time to spend on just setting up your machine. The problem with using Ghost or some similar software is that I get a system without all of my current data (profiles, files, documents etc.), and as for virtual machines, they're simply not fast enough yet for constant use (at least on my modest home desktop or laptop).

Sunday, January 29, 2006 11:34:24 PM (Jerusalem Standard Time, UTC+02:00)  #    -
Personal | Software
# Tuesday, January 24, 2006

... there's an online video of 8088 Corruption that is an absolute must-see.

Trixter, you rock!

Tuesday, January 24, 2006 8:55:01 PM (Jerusalem Standard Time, UTC+02:00)  #    -
Demos | Personal
# Sunday, January 22, 2006

1. Ever since I bought my car several months ago I've been looking for a decent audio platform to put on it. My primary concern was support for the excellent Vorbis audio codec - this is the codec I use most often in my music archive due to its superiour quality (I spent hours and hours comparing best-case rips encoded with LAME [MP3] and Vorbis and have found Vorbis to be the better codec - I'll write another post about that if anyone's interested), smaller footprint and patent-free nature.

Although Vorbis (and its container format OGG) has seen lackluster support from hardware vendors since its introduction in 2001, the past two years have seen thoroughly improved support for the codec -- most portable players (including oblique Chinese models) now support Vorbis just fine. Cars, however, are a completely different issue: there are exactly four car-oriented products that support Vorbis (the Vorbis wiki contains a complete list) and I wouldn't settle for 'just' an MP3 player. For a time I was considering building an ITX-based car computer, orevaluated products such as the PhatBox; eventually I settled on a more mundane in-dash CD receiver called Yakumo Hypersound Car. The decision was mostly based on the cost of the more exotic solutions and the much higher risk of someone trying to break into my car.

The Yakumo is very difficult to get; you can either get it from Amazon UK (but they don't deliver electronics overseas) or from certain German vendors. I eventually ordered the unit from a very efficient eBay shop and it finally arrived last week.

Anecdote: Israeli tax is murder; not only did I have to pay the 16% European VAT (having bought the unit from a German reseller), which I may or may not be able to get back, and the €40 shipping fee; on top of that I had to pay an additional 15% customs tax and 16.5% Israeli VAT, and that's on the shipping too! So bottom line, a €96 unit cost me close to €200, shipping included. That's an insane amount of money to pay just for the privilege of buying something you can't get in your own country, and even if you could you'd probably be forced to pay the local importer handsomely. And imposing a tax on the shipping fee should be proper illegal.

Installation was a breeze (any experienced technician should be able to do it in 20 minutes; I'm not an experienced technician so it took close to an hour with my dad helping out), and with everything hooked up I inserted a freshly-burned CD, held my breath and... woah! Iris playing in my car in gorgeous Vorbis! That alone was worth the price of admission. I do have some qualms with the device, though, primarily the lackluster display (yeah, OK, blue backlighting has been out of fashion for at least a couple years) and the awkward navigation (you can't easily navigate by album), but considering the very reasonable initial cost of the unit, which also comes with an SD card-reader, USB port for mass storage devices and remote control (!) and the so-far excellent sound quality which easily rivals the generic JVC CD receiver I had earlier, this product comes highly recommended. Update (after a short period of constant use): I do NOT recommend this product.

2. I just got my second Microsoft Natural Ergonomic Keyboard 4000 (a.k.a Ergo 4000). It has replaced the trusty Model M; we'll see if it lives up to the hype. I actually got one last month, but returned it the same day because Hebrew character engraving looked as though they were hand-drawn by a five year-old with severe ADD. This one feels a bit different but is so far extremely comfortable; I'm astounded that no other keyboard features a cushioned hand-rest like this one, it makes working with the keyboard infinitely more comfortable to the point where I don't know how I managed to live without it all these years. I've used Microsoft Natural keyboards for the last ten years so the ergonomic ("split") design is one I'm very familiar with. There are some differences though - some keys are aligned a bit differently and require different finger movements, but so far I seem to be getting used to the layout very rapidly. The tactile feel of the keyboard is also different from the Microsoft Natural Elite I've been using these past few years ('till I switched to the Model M); it's softer and at first seems slightly less responsive (during the first couple hours of working with the keyboard I was very prone to the classic manglign-of-the-last-two-lettesr syndrome) but as soon as you adjust the strength with which you depress the keys it becomes very natural (no pun intended). Unlike my dad's crappy Microsoft Desktop Multimedia keyboard this one has the f-lock enabled by default, and so far I haven't touched the extra keys or zoom slider. At $65 it's not cheap but not prohibitively expensive either (unlike the $80 Logitech MX1000 mouse I use).

So far, so good. I'll post further comments on the keyboard when I've used it for a while.


Sunday, January 22, 2006 9:26:11 PM (Jerusalem Standard Time, UTC+02:00)  #    -
# Wednesday, January 18, 2006

I was doing some research on how to use a certain component we were given as part of a project. It is a COM object written with ATL; I referenced it via interop and everything seemed to work perfectly. Until we integrated it into the main codebase, that is. For some reason the same code would barf on any call made to a method/property of a legacy ADO Recordset object; an instance of Recordset is passed by reference to the COM object, which initializes it to certain values. For some reason any call to the Recordset instance after the COM method call would result in a NullReferenceException being thrown by the framework.

Oddly enough, tests on the research codebase (on my own machine) now proved to generate the exact same error; considering I had written and tested the code merely two days before, I was disinclined to believe the code to be at fault. Something told me to look into the interop assemblies - we sign every COM/ActiveX import in the project with our own keyfile using a script which runs tlbimp/aximp - and reverting to the VS-generated interop assemblies did indeed resolve the issue. I couldn't find any solution using Google (a Groups search provided a similar issue with no solution offered). Finally I stumbled upon the following quote in this article:

But Primary Interop Assemblies have another important use. Interop Assemblies often need modifications, such as the ones shown in Chapter 7 to be completely usable in managed code. When you have a PIA with such customizations registered on your computer, you can benefit from these customizations simply by referencing the type library for the COM component you wish to use inside Visual Studio .NET. For example, the PIA for Microsoft ActiveX Data Objects (ADO), which ships with Visual Studio .NET, contains some customizations to handle object lifetime issues. If you created your own Interop Assembly for ADO using TLBIMP.EXE, you would not benefit from these customizations.

Since the ADO COM object was automatically imported along with our proprietary objects this got me wondering what sort of "custom optimizations" I might be missing out on. A quick look in the knowledgebase article on the ADO PIA didn't prove very effective (short of a vague statement about "the ADO PIA helps to avoid certain problems with ADO and .NET COM interoperability") but I decided to try it out anyway; I removed the preexisting reference from the project, added "adodb" from the .NET tab in the Add References dialogue (you could look it up manually in the GAC, but why would you?), fired it up - problem solved.

As an anecdote, referencing an external library with tlbimp's /reference command line parameter (particularly the ADODB PIA from the GAC) did not stop it from generating the imported library anyway. Just go ahead and delete it.

Wednesday, January 18, 2006 9:23:19 PM (Jerusalem Standard Time, UTC+02:00)  #    -
# Sunday, January 15, 2006

I saw this joke and couldn't help myself. Sorry, it won't happen again.

Sunday, January 15, 2006 12:36:42 AM (Jerusalem Standard Time, UTC+02:00)  #    -

# Tuesday, January 3, 2006
Or rather, help me to help them :-)  I keep filing bugreports (which are usually fixed by the next release) and feature requests, but in order to get attention the feature requests need votes. Have a look at these two feature requests and vote (or comment) if you think they're important. If not, tell me why:

Additionally, build 215 is out.

Tuesday, January 3, 2006 7:34:38 PM (Jerusalem Standard Time, UTC+02:00)  #    -
Or: How I Learned To Stop Worrying And Love Firefox (this is a Dr. Strangelove reference, in case that wasn't obvious).

There are some fundamental principles of UI design most developers have not taken to heart. Developing a good UI is hard, designing one is excruciatingly hard. A good UI designer needs to have a very developed sense of how a typical user thinks; it is therefore a commonly held belief that most programmers make lousy UI designers because they can't "stoop to the level of the non-technical user" (a slightly less rehearsed mantra is that developers are users as well and are susceptible to the same problems with crappy UI, although possibly a little more forgiving). The developer-oriented UI trend is most obvious with open source software, but it is actually exacerbated when we're talking properietary, even if free, software. An open source tool that is essentially really good but has crappy UI will eventually attract someone who is actually capable in that department. Take a look at Eclipse,, The Gimp etc. - although based on a more or less solid foundation, these tools were practically useless a few years ago and have only become mainstream when they made leaps and bounds in usability. An even better example is Firefox; although I was personally attracted to Firefox on merit of its technical achievements, I was only able to sell it to friends and relatives becaues it is infinitely more usable than IE and just as free (I mean come on, does anyone doubt why Opera never gained marketshare?)

A proprietary program however, even if fundamentally sound and useful, can only grow better by the efforts of its owners. Even the most obvious bugs can never be fixed by a 3rd party. w.bloggar is a classic example of this; the last version was out in January and, despite being fundamentally stable and usable, has huge flaws which the author never fixed, instead allowing the software to stagnate. I reckon a lot of you, at this point, are thinking along the lines of "hey, you get what you pay for; you should be thankful that w.bloggar is free, let alone supported!" In a way you are right, but also dead wrong. As far as I know Marcelo (the author of w.bloggar) isn't seeing much money from his work on the software; what money he does get is from donations. So why not release the source? Donation systems seem to work for high-profile open-source projects at large, why not for w.bloggar? At least that way someone can fix the bugs that (for me) turned w.bloggar from a useful tool to a constant cause of frustration.

To get to the point, I wrote a blog entry in w.bloggar (specifically the one about missing tools), published it and went on with my work. At the end of the day I left the machine running (as I always do when I'm not leaving for days at a time) along with w.bloggar. Why'd I leave w.bloggar open, you ask? Simple: one of these glaring bugs I mentioned is that w.bloggar does not retain my preview template options (CSS links and so forth), and it's a pain in the ass to enter them manually whenever I want to edit or write a new post. Anyway, w.bloggar has a "Clear Editor after Post" option which in my case was disabled. This means that whenever w.bloggar finishes uploading a post, it retains the text and changes its internal state so that subsequent clicks on Post update the same entry (as opposed to creating a new one). So what basically happened is that when I came in today and wanted to write the note on, the previous post was still "live" on w.bloggar. Usually at that point I click on New (which shows a nice, useless warning dialog) and get on with it; this time I guess I was distracted, just shift-deleted everything and proceeded to write. When I next clicked on Post and got the "Post so-and-so-GUID updated successfully" notice I knew I was up the creek: my earlier post was overwritten with no prior warning, no delay and worst of all: no backup.

Which brings me to my first point: w.bloggar sucks. Bugs (like not retaining options and the most defective HTML syntax highlighting known to man) aside, this is a huge usability problem - a user can (and evidently will) inadvertently erase his/her own work and have no way to recover it. The undo buffer is not even remotely deep enough; there are no dialogs to warn you that you're about to update a live post, and there are no backups-shadow copies-anything of published posts if you do not actively save them. Worst of all, there is no-one to mail, no bug tracker, not even a forum (the forum link on the w.bloggar site is broken). My first resolution for 2006: make more effort on PostXING and help Chris make it actually useful.

Now that that's out of the way, time for some damage control; w.bloggar is useless in recovering the lost content, dasBlog does not maintain any sort of backup (side resolution: implement shadow copies into dasBlog) and considering how cheap my hosting package is I seriously doubt my ISP would help me recover yesterday's daily backup (assuming there even is one) without significant trouble and/or cost. The only option that comes to mind is the browser cache; in case it isn't obvious from the title (and the large "take back the web" icon on the right), I use Firefox. Going over the cache files manually proved futile as most of them seemed to be binaries of some sort; some research showed me that you can access cache statistics by navigating to about:cache; from there you can access an actual dump of the in-memory and on-disk hashes. Looking at the on-disk cache via about:cache?device=disk and searching for something useful, I found a cache entry for the editing page. Clicking the link did not prove readily useful (the actual content is not displayed), but the information displayed shows two important details: the file location and the content encoding (in this case, gzip). This explains the strange binaries I found in the cache! A quick decompression via the excellent 7-zip and I had my content back. Second point of the day: Firefox has once again proved its mettle. Firefox rocks!

Tuesday, January 3, 2006 1:55:29 PM (Jerusalem Standard Time, UTC+02:00)  #    -
Personal | Software
Coninciding with the release of 2.0.1, the team has released a Hebrew version based off of the 2.0 codebase! It is sponsored (ironically) by the Israeli Ministry of Finance.

I haven't really tested this version but I do hope it's all it's cracked up to be. Time will tell.

Tuesday, January 3, 2006 12:16:03 PM (Jerusalem Standard Time, UTC+02:00)  #    -
# Monday, January 2, 2006
Every developer has some glaring omissions from his/her toolbox. I just found one of mine: Chris Sells' XmlSerializerPreCompiler. I honestly don't know how I managed without it thus far.

Now that I mention it, here's a short (?) list of tools I constantly use as a developer, at work and elsewhere:

  • I've said it once and I'll say it again, JetBrains' ReSharper is absolutely indispensable to any serious .NET developer. It's worth every penny.
  • Roy Osherove's The Regulator is so far the best regular expression IDE around. It has its issues, though, so I can't wait for version 3.0. Best of all, it's completely open source!
  • My XML IDE of choice is Stylus Studio, which I find preferable to Altova's XmlSpy. Both cost mundo bucks though.
  • Enterprise Architect combines the UML powerhouse features of XDE with near-Visio ease-of-use. It's not perfect (not even remotely) but is definitely the best modelling tool I've used to date.
  • Cygwin whenever I need anything from the GNU realm (in particular GCC and Unix-oriented open source tools).
  • NDoc is the best thing since sliced bread. I use this open-source tool whenever "hardcopy" design/code documentation is required, or whenever I want to provide an MSDN-like reference to an API.
  • GhostDoc saves many a pointless keystroke. Just Ctrl+D and you're 50% into your XML documentation. Brilliant in simplicity and absolutely stable. Best of all, it's free...
  • Total Commander has replaced Servant Salamander as my Norton Commander clone of choice. I still can't understand how people manage to be productive without an NC-type file manager.
  • NUnit comes in handly when writing test and test-driven code. I'm not a big fan of TDD (to be fair, I never got the chance to try TDD hands-on on a large scale project), but whenever it comes up it's practically synonymous to NUnit. Make sure to install TestDriven.NET as well.
  • One of the best debugging and reverse-engineering tools around, Ethereal, also happens to be open-source. I can't even begin to count the number of times this tool has saved my ass.
  • The single most comprehensive tool I've ever come across is the ubiquitous Google. Make good use of it...
  • I use Process Explorer, psexec and pskill from SysInternals about 20 times a day. Mark deserves knighthood (or maybe half the kingdom) for making these tools.
  • Any .NET developer would do well to know Lutz Roeder's classic Reflector. It is as indispensable as the .NET framework itself.
  • XMPlay and Sennheiser HD600. Music is life.
Monday, January 2, 2006 3:16:19 PM (Jerusalem Standard Time, UTC+02:00)  #    -
Send mail to the author(s) Be afraid.
<January 2006>
All Content © 2024, Tomer Gabel
Based on the Business theme for dasBlog created by Christoph De Baene (delarou)